Highly efficient water‐soluble visible light photoinitiators

The monoacylphosphineoxide (MAPO) salts Na‐TPO and Li‐TPO and the bisacylphosphineoxide (BAPO) salts BAPO‐ONa and BAPO‐OLi define an important and in the latter case a new class of water‐soluble photoinitiators (PIs) for radical polymerization. These compounds showed excellent water‐solubility of at least 29 g/L for Na‐TPO and up to 60 g/L for BAPO‐ONa in deionized water, thus exceeding the solubility of the state of the art PI for water‐based systems Irgacure 2959 ( I2959 ) 6‐ to 12‐fold. However, biocompatibility, storage stability, and reactivity were equally important to replace the state of the art compounds. Concerning these properties, the MAPO and BAPO salts were at least in the same range (biocompatibility, stability) or showed even better results (reactivity) and had the additional advantage of visible light initiation. Na‐TPO and Li‐TPO achieved double bond conversions of an aqueous solution of N‐acryloylmorpholine over 97% with broad band irradiation (320–500 nm), Li‐TPO showed additionally very good biocompatibility (LC₅₀ = 3.1 mmol/L) and BAPO‐OLi showed highest reactivity with visible light irradiation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 473–479     

Stochastic and upscaled analytical modeling of fines migration in porous media induced by low-salinity water injection

Fines migration induced by injection of low-salinity water(LSW) into porous media can lead to severe pore plugging and consequent permeability reduction. The deepbed filtration(DBF) theory is used to model the aforementioned phenomenon, which allows us to predict the effluent concentration history and the distribution profile of entrapped particles. However, the previous models fail to consider the movement of the waterflood front. In this study, we derive a stochastic model for fines migration during LSW flooding, in which the Rankine-Hugoniot condition is used to calculate the concentration of detached particles behind and ahead of the moving water front. A downscaling procedure is developed to determine the evolution of pore-size distribution from the exact solution of a large-scale equation system. To validate the proposed model,the obtained exact solutions are used to treat the laboratory data of LSW flooding in artificial soil-packed columns. The tuning results show that the proposed model yields a considerably higher value of the coefficient of determination, compared with the previous models, indicating that the new model can successfully capture the effect of the moving water front on fines migration and precisely match the effluent history of the detached particles.     

An improved depth-averaged nonhydrostatic shallow water model with quadratic pressure approximation

Phase-resolved information is necessary for many coastal wave problems, for example, for the wave conditions in the vicinity of harbor structures. Two-dimensional (2D) depth-averaging shallow water models are commonly used to obtain a phase-resolved solution near the coast. These models are in general more computationally effective compared with computational fluid dynamics software and will be even more capable if equipped with a parallelized code. In the current article, a 2D wave model solving the depth-averaged continuity equation and the Euler equations is implemented in the open-source hydrodynamic code REEF3D. The model is based on a nonhydrostatic extension and a quadratic vertical pressure profile assumption, which provides a better approximation of the frequency dispersion. It is the first model of its kind to employ high-order discretization schemes and to be fully parallelized following the domain decomposition strategy. Wave generation and absorption are achieved with a relaxation method. The simulations of nonlinear long wave propagations and transformations over nonconstant bathymetries are presented. The results are compared with benchmark wave propagation cases. A large-scale wave propagation simulation over realistic irregular topography is shown to demonstrate the model's capability of solving operational large-scale problems.     

Surface Engineering of Conjugated Polybenzothiadiazoles and Integration with Cobalt Oxides for Photocatalytic Water Oxidation

Conjugated polymers feature promising structure and properties for photocatalytic water splitting. Herein, a hydrolysis strategy was demonstrated to rationally modulate the surface hydrophilicity and band structures of conjugated poly-benzothiadiazoles. High hydrophilicity not only enhances the dispersions of polymeric solids in an aqueous solution but also reduces the absorption energy of water molecules. Besides, both theoretical and experimental results reveal that a more positive valence band potential is generated, which contributes to enhancing the photocatalytic water oxidation performance. Accordingly, the surface-modified conjugated polymers show largely promoted photocatalytic water oxidation activities by deposition of cobalt oxides as cocatalysts.     

Systematic Modulation of Thiol Functionalities in Inexpensive Porous Polymers for Effective Mercury Removal

Through accumulation, mercury contamination in aquatic systems still poses serious health risks despite the strict regulations on drinking water and industrial discharge. One effective strategy against this is adsorptive removal, in which a suitably functionalized porous material is added to water treatment protocols. Thiol (SH) group-grafted structures perform commendably; however, insufficient attention is paid to the cost, scalability, and reusability or how the arrangement of sulfur atoms could affect the Hg^II binding strength. We used an inexpensive and scalable porous covalent organic polymer (COP-130) to systematically introduce thiol functional groups with precise chain lengths and sulfur content. Thiol-functionalized COP-130 demonstrates enhanced wettability and excellent Hg^II uptake of up to 936 mg g⁻¹, with fast kinetics and exceptionally high selectivity. These Hg adsorbents are easily regenerated with HCl and can be used at least six times without loss of capacity even after treatment with strong acid, a rare performance in the domain of Hg-removal research.     

Nitrogen Doping and Carbon Coating Affects Substrate Selectivity of TiO2 Photocatalytic Organic Pollutant Degradation

A series of carbon-coated, nitrogen-doped titanium dioxide photocatalysts was produced and characterized. N-doped TiO₂ powder samples were prepared using a sol-gel method and subsequently used for making doped-TiO₂ thin films on glass substrates. Carbon layers were coated on the films by a thermal decomposition method using catechol. Diffuse reflectance spectra and Mott-Schottky analyses of the samples proved that nitrogen doping and carbon coating can slightly lower the band gap of TiO₂, broaden its absorption to visible light and enhance its n-type character. According to photocatalytic tests against model contaminants, carbon-coated nitrogen-doped TiO₂ films have better performance than simple TiO₂ on the degradation of Rhodamine B dye molecules, but are poorly effective for degrading 4-chlorophenol molecules. Several possible explanations are proposed for this result, supported by scavenging experiments. This reveals the importance of a broad substrate scope when assessing new photocatalytic materials for water treatment, something which is often overlooked in many literature studies.     

Comparison of Penta and Tetra-pyridyl Cobalt-based Catalysts for Water Reduction: H2 Production Cycle,Solvent Response and Reduction Free Energy

Understanding water reduction towards H₂ generation is crucial to overcome today's renewable energy obstacles. Previous studies have shown the superior H₂ production performances of Cobalt based penta-pyridyl (CoaPPy) and tetra-pyridyl (CoaTPy) complexes in solution. We investigate H₂ production cycles of CoaPPy and CoaTPy complexes immersed in water solution by means of Ab-initio Molecular Dynamics and Density Functional Theory. We monitor dynamic properties of the systems, solvent response and structural changes occurring in the catalysts, by simulating all intermediate steps of the H₂ production cycle. Reduction free energies and reorganization energies are calculated. Our results show that, following the first electron injection, H₂ production proceeds with the singlet spin state. Following the first electron insertion, we observe a significant rearrangement of the hydrogen bonding network in the first solvation shell. The cobalt center turns out to be more accessible for the surrounding water molecules in the case of CoaTPy at all the intermediate steps, which explains its higher catalytic performance over CoaPPy. Following the first reduction reaction, a larger gain in reduction free energy is estimated for CoaTPy with respect to CoaPPy, with a difference of 0.14 eV, in line with the experiments. For the second reduction, instead, CoaPPy shows more negative reduction potential, by 0.41 eV.     

缝洞型碳酸盐岩油藏注水驱油提高采收率研究

Y油田为缝洞型碳酸盐岩油藏,油藏复杂的地质特征决定了其开发模式有别于常规砂岩油藏.为了有效提高Y油田采收率,利用Eclipse数值模拟软件建立了地质模型,对水平井长度、射孔间距及酸压缝长等油藏产能影响因素与转注时机、注采比以及关井时间等注采参数进行了优化.结果认为:对于Y缝洞型碳酸盐岩油藏,水平井水平段长度为500m、射孔间距为20m或酸压规模为100m时,累计产油量可达到最大值;压力降至废弃压力时进行转注,可获得最大采收率;周期注采比等于1时,周期时效与累计增油量达到最大值;关井时间为8天时,采收率提高幅度最大.     

水火箭的制作与发射——初中物理教学课外活动拓展

物理课外实验能让学生真正动手操作、体验,从而提高学生的物理核心素养.水火箭的制作与发射,蕴含知识面广,发射效果震撼,能让学生对物理与科技的联系有直观深刻的认识.     

超临界水驱超稠油提高采收率热物理特性研究

超稠油资源的高效开发对于提高石油供给和保障我国石油安全意义重大。针对深层超稠油资源由于原始地层压力高、原油黏度大导致常规蒸汽驱无法有效开发的问题,本文提出超临界水驱开发深层超稠油的新思路。本文首先研制了超临界水驱油提高采收率实验平台,研发的管式填砂岩心模型能够模拟岩心升温和驱替的同步过程,然后开展了超临界水驱、蒸汽驱和热水驱对比实验研究,实验结果表明,相对于蒸汽驱,超临界水驱能显著提高采收率并具有更高的热效率,25MPa、400℃超临界水驱鲁克沁超稠油的采收率达到97.07%;获得了超临界水驱过程的温度场和驱替压差变化规律,发现了超临界水超覆现象,与蒸汽超覆相比,超临界水超覆发生晚且持续短,可扩大波及范围,提高采收率。